Description RIX series are small-sized, lightweight and power-saving X-ray generator suitable for imaging flaws in steel structures and welds of pipeline. Feature Lightweight & Small Size For easy operation on site, the RIX ceramics series has a small-sized and light weighted X-ray generator. It provides a significant performance for Radiographic Testing (RT), even under narrow areas and with a single operator. Energy-Saving Design Design...

Description 360°irradiation compact and lightweight portable X-ray generator. Feature Suitable for φ150mm small diameter tube.   It is a  lightweight X-ray generator. Spesifikation RIX160NM/PC160kV3mA RIX200NM/PC200kV3mA ...

Description RIX-CP series are inverter-controlled X-ray generator. Feature soft X-ray region generator which has ability to adjust up to 30kV-100kV. Spesification RIX-100CP100kV5mA ...

Description JX-5 is installed with RIX-200 X-ray generator which has moving capability going forward and back. Utilized as one of the NDT methods for welds for gas pipelines, oil pipelines and petrochemical pipelines etc. ...

Description XIF-80 is a source of high-resolution fluorescent screen, with a CCD camera combined into the system. Main purpose are for field of early stage inspection. The images can be shown on a notebook PC which is included. Feature Arrangement between Fluorescent plate and CCD camera conveys sharper images. Complicated free system, easy to use.  Spesification DIGITAL PHOTOGRAPHICAL DISPLAY X-RAY GENERATORX-RAY SHIELD BOX Photo...

Description TRIX series is installed type X-ray generator with high-power, highly stable and high-frequency inverter generator. In addition by using soft X-ray region, it has a wide range of tube voltage. kV and mA are configurable externally. Possible for continence exposure. Feature General photography equipment for industrial applications Line sensor devices Irradiation apparatus Fluoroscopic inspection system CT inspection system etc Spesification TRIX-150L30.0-150.0kV Large...

Description By adapting high-outputs 150kV-75W, it will allow to show images such as power devices and cast metals. Also, 100μm focus provides with sharper images. Even though this system has a high-power resource it performs with low-noise frequency kV and mA are configurable externally. Possible for continuous exposure. Feature Power device inspections casting inspection Fluoroscopic examination and etc. Spesification TRIX-150M...

Description Irradiation angle of 45 degree with high output, stability and frequency inverter typed X-ray generator. kV and mA are configurable externally. Possible for continuous exposure.  Featur Line-inspection Heavy luggage inspection CT inspection and etc. Spesifikation TRIX-100W30-100kV1.0-3.5mA TRIX-150W30-150kV Large focus: 1.0-2.4mA Small focus: 0.5-1.4mA TRIX-160W30-160kV0.5-2.8mA ...

Description With over 85 years of experience, MAC has a wide variety of custom designed systems for the inspection of oil country tubular goods (OCTG) and other oil and gas products that not only meet individual client specifications, but that of API 5CT and 5L, ASTM, and ISO. MAC’s highly trained and knowledgeable engineers, field staff, and representatives provide superior NDT equipment, services, and training worldwide. MAC’s Rotoflux®...

Description Metallic inclusions in copper tubing may appear from two major sources.   The first one comes from the material itself which can contain residual impurities from continuous casting.  The second and major source of metallic inclusions in copper finned tubes occurs during the manufacturing process. They can appear in the tube when the tool used to make the fins is breaking.  Small particles of metal (tungsten) make...

Description A new 750 RBT eddy current rotary was designed for the inspection of round billets up to 7.5" (190.5mm). Feature Contains 4 to 8 channels Windows® based user interface Set up may be done in less than 10 minutes and only requires an adjustment of the headplate probes Spesification In comparison to the previous system which only used 2 probes, the 750 rotary utilizes 4 probe arms that are each 90 degrees apart and each with...

Description The Magnetic Analysis ultrasonic billet inspection system makes it possible to ultrasonically inspect large bar product at production speeds. Each of the four test heads covers a quadrant of the bar or automatic mode, test heads extend and retract as the billet or bar passes through the system. Coupling water is supplied to each testing head through an independent cooler/circulator to ensure consistent pressure and temperature....

Description Factors that influence system selection include the capabilities and limitations of each technology, as well as the diameter, wall thickness, tube condition, and throughput speed of the product under test. Where the test is applied in the manufacturing cycle also influences the choice of method and apparatus. This can range from tests limited to the heat affected zone on the weld mill with perhaps an in-line anneal, to full body inspection...

Description All NDT test methods have some limitation in regard to testing to the very end of a tube. These “untested ends” must be cut off, resulting in a substantial loss of product and revenue, or the manufacturer needs to develop a method to test these ends to meet the tube integrity requirement. Some industries require that the end be tested to a higher level of integrity because it is being expanded, threaded, or welded in the field, and...

Description Alat ini diguanakan untuk mengetahui kekerasan material logam dengan parameter scale dapat dikonversikan  dari beberapa Leeb,atomatis konversi Feature Direct conversion of HL,HRB,HRC,HB,HV,HS; Conversion to tensile strength Direct display showing all functions and parameters With high accuracy and wide measurement for all metallic material Seven different kinds of impact device are available, distinguish automatically, no...

Description Digital Universal Hardness Tester TH725 adalah alat penguji kekerasan yang mengkombinasikan teknologi canggih dari optical, mekanik dan teknok elektronik. Feature Big LCD display shows stable and accurate results  Digital versatile hardness tester for Brinell, Rockwell, Vickers testing  Conversion among different hardness scales  Selection of dwell time and setting of time and date  Storage and printing function  RS232...

Description TIME7212 vibration tester is equipped with piezoelectric acceleration sensor. It can convert the vibration signal into electric signal, and then the value of acceleration, velocity and displacement will be displayed by analyzing the inputting signal. And the testing result or acceleration spectrum can be printed out with a connected printer. TIME7212 is not only used for normal vibration testing, but also applied for the diagnosis...

Description TIME7120/TIME7122/TIME7126 vibration meter is equipped with acceleration integrated sensor, which makes it has the advantage of being small and light, portably to carry. It is mainly used for the quick check of motor, electric fan, pump, air compressor, machine tools and so on, it is also used for the preventive examination of malfunction of mechanical equipments. Feature Prompt testing of vibration on the workshop machines...

Desciription Vibration Tester TIME7232 Feature TIME®7232 is equipped with high sensitivity probe, suitable for testing weak vibration signal. Two display modes: digital value mode and spectrum mode Large memory function:100×100 measured results(100 testing points, 100 data can be stored in each testing points ); 100 spectrograms Spectrograms can display in real time Easy diagnosis: alarm is sounded when vibration go over limit set ,and get...

Description Acceleration:5Hz~10000Hz Velocity:5Hz~1000Hz Displacement:5Hz~500Hz Feature Three channels(CH1, CH2 and REV) are available, the vibration of any two of the three directions including X axis, Y axis and Z axis   can be tested. Five measuring modes: three parameters measuring AVD mode, dynamic time domain waveform(TIME mode), dynamic  spectrum measurement FFT mode, data sampling Sample mode, rotation speed measurement(...

Description TV120 vibration tester is equipped with piezoelectric acceleration sensor. It can convert the vibration signal into electric signal, and then the value of acceleration, velocity and displacement will be displayed by analyzing the inputting signal. And the testing result or acceleration spectrum can be printed out with a connected printer. TV120 is not only used for normal vibration testing, but also applied for the diagnosis of simple...

Description TV310/320 vibration tester is equipped with piezoelectric It can convert the vibration signal into electric signal, and then the value of acceleration, velocity, displacement or spectrum will be displayed by analyzing the inputting signal.  TV310/320 is always used for normal vibration testing, especially for the vibration testing of rotating or reciprocating machines. Feature TV310 is equipped with low sensitivity probe,...

Deskription Vibration Pen TIME 7230 Feature Two display modes: digital value mode and spectrum mode Large memory function: 100 x 100 measured results (100 testing points, 100 data can be stored in each testing points), 100 spectrograms (each testing point can store one spectrogram) Spectrogram can display in real time Histogram can be made according to the preset alarm line Upper /lower limits pre-setting and sound alarm if test results out...