Jumat, 14 November 2014

Viscosensor, Type I

untuk meningkatkan keandalan dan stabilitas kualitas cat dan coating.









Feature

  • Simple robust construction resists breakdowns; great repeatability.
  • Tank insertion type, easy to handle and operate.
  • Can be used even in processes where volume of liquid is low.
  • Utilizes falling cylinder mechanism proven in our Model F online viscometer.
  • Sampling not necessary resulting in significant material economy and labor-savings.
  • Both pneumatic (explosion-proof, nonexplosion-proof) and motor drive (nonexplosion-proof) models are available.

Spesification

Measurement liquidType :liquid in open tank or bath with low amounts of suspended impurities
Liquid temperatures :0 ~ +120 ℃
Measurement rangeSpecify 1 of the following ranges (mPa・s)
Falling cylinder, B 0 ~ 5 / 0 ~ 10 / 0 ~ 20
Falling cylinder, C 0 ~ 20 / 0 ~ 50 / 0 ~ 100
Falling cylinder, D 0 ~ 100 / 0 ~ 200 / 0 ~ 500
Falling cylinder, E 0 ~ 500 / 0 ~ 1000 / 0 ~ 2000
Measurement value
display units
(viscosity units)
% unit :% unit display of viscosity measurement values with full-scale of 100%
SI units :% units converted and displayed in SI units. (Unit ‘: mPa・s’)
Measurement cycleIV-200A/200E IV-200M(60Hz) IV-200M(50Hz)
Measurement cycle 60 sec 60 sec 72 sec
Fall 30 sec 30 sec 36 sec
Return 30 sec 30 sec 36 sec
Accuracy/repeatabilityAccuracy :within ± 5% of full-scale
* In case of ± 0.1g/cm3 change in degree of density of measurement
liquid with no change in measurement tube immersion depth.
* Full-scale fluctuation within ± 1% relative to ± 50mm change in
measurement tube immersion depth
Repeatability :within ± 2% of full-scale

Tidak ada komentar:

Posting Komentar