Senin, 25 September 2017

VIBRATION METER Multi Channel Model-1607a


This a VIBRATION METER as Small charge vibrometer capable of multichannel simultaneous measurement. General-purpose type small vibrometer capable of measuring three modes of acceleration, velocity and displacement. Wide-band and capable of measuring from a minute level to a large level. Capable of selecting a band matching a measurement object because of the built-in high-pass/low-pass filter. Capable of appropriately using various sensors with ease by the easy setting of the sensor’s sensitivity. Capable of using a remote charge converter and a detector with a built-in preamp in addition to an ordinary charge-output type detector.


3CH mounted
Amp UnitMODEL-1607A3pc
Power Supply UnitMODEL-1607A-10M1pc
Channel CaseMODEL-1607A-231pc
Instruction manual1copy
*Capable of multichannel, max. 10-channel.


 Input Rear Panel BNC Connector, Charge-Output Sensor/ Built-in Preamp
Charge inputPU SENS×1:1.00-9.99pC/G
PU SENS×10:10.0-99.9pC/G
Max input charge10,000pC
Voltage Input ConnectorPU SENS×1:1.00-9.99mV/G
PU SENS×10:10.0-99.9mV/G
Max input voltage±10V
Supply current2mA, 15VDC(0.4-4mA)
AC OUT(BNC)Vibration waveform output
±1V/FS Output resistance 100Ω 5mA Max.current
DC OUT(BNC)Trend recording as level output
0-1VDC Output resistance 100Ω 5mA Max.current
Overload lampWhen the linear range is exceeded in the internal circuit,
LED lamp is on.
 Measuring Range
ACC1(G)1Hz-50kHz(1dB), 2Hz-20kHz(0.5dB)
PU SENS×10:0.0316/0.1-100/316/FS
PU SENS×1:0.316/1-1000/3160/FS
ACC2(m/s2)1Hz-50KHz(1dB), 2Hz-20kHz(0.5dB)
PU SENS×10:0.316/1-1000/3160/FS
PU SENS×1:3.16/10-10000/31600/FS
PU SENS×10:0.316/1-1000/3160/FS
PU SENS×1:3.16/10-10000/31600/FS
PU SENS×10:0.1/0.316-316/1000/FS
PU SENS×1:1/3.16-3160/10000/FS
PU SENS×10:0.01/0.0316-31.6/100/FS
PU SENS×1:0.1/0.316-316/1000/FS
High-pass filter(Hz)OUT(1Hz)/3/10/30/100
Low-pass filter(Hz)300/1k/3k/10k/OUT(50KHz)
 The Others
AccuracyWithin 3% at 80Hz,100pC input
Cal signal80Hz,±1V max. sinusoidal wave
Temperature, Humidity0-50ºC,90%RH max.
Dimensions, weight35(W)×177(H)×230(D)mm 0.7kg
 Power Supply Unit MODEL-1607A-10M
AC100V ±10%, CAL signal:80Hz ±1V sinusoidal wave, 10CH selectable monitor meter.
Dimensions, weight90(W)×177(H)×230(D)mm 1.1kg
Channel Case, weight3CH- 1.8kg 6CH- 2.5kg

Tidak ada komentar:

Posting Komentar